Introduction
Watch the following video for instructions on removing, and reinstalling the headlight for the Juggernaut XD!
You will need the following tools to do this:
Electrical Tape (or other good adhesive tape)
A Fishing Line or "Guide Cable"
Not literally a fishing line but some strong cable to pull the wire through the frame! We recommend bike brake cable, bike shifter cable, twine, a thick guitar string or many other possibilities! They must be strong, fairly thin and long enough to go from your bike's controller to outside the head tube at least 2 feet/600mm.
Phillips Screwdriver
5mm Allen Key/10mm Wrench or other tools to mount and dismount headlight
You will need to remove the service cover to do this - if you are unsure of how to do this check the guide linked below!