Skip to main content

Introduction

If you have removed the rear wheel on your Juggernaut XD or Juggernaut XD Eagle or are feeling the drive side chain a bit loose and sluggish for putting down power you may need to adjust or set the chain tension. Follow this guide for instructions on how to do this!

You will need the following tools depending on the model you have:

  • Juggernaut XD / XD Duo Tools

    • 2 x 10mm Wrench

      • Alternatively one 10mm Wrench and one Ratcheting Wrench with a 10mm Socket head

    • Work Gloves

      • Important to not contaminate your rear brake rotor during the cleaning process!

  • 2 x 10mm Wrench

    • Alternatively, you can use one 10mm Wrench and one 10mm Socket

  • Work Gloves

    • These will keep your hands from getting greasy and dirty and keep dirt and grime from accumulating on the bike

  • Juggernaut XD Eagle Tools

    • 4mm Allen Key

    • T45 Head Screwdriver or Driver Head to use with a screwdriver