Skip to main content

Introduction

Watch the following video for instructions on removing the Bafang Ultra M620 motor from your eBike.
You will need the following tools to perform this removal or reinstallation:

  • 4mm, 5mm, 8mm Allen Key

  • 13mm Socket w/ ratchet

  • #2 Phillips Screwdriver

  • ISIS Crank Arm Puller

  • Deep Hollowtech External Bottom Bracket Socket

  • Deadblow Hammer

  • 12" Adjustable Wrench

  • Split Ring Pliers

If you are looking for step-by-step text instructions proceed below!

Need steps for removing the lockring? Check out the other video related to this linked below!

We also have a  "limited toolset" version if you need to accomplish this in a hurry and are unable to remove the chainring!